6 inch Plaction Wheel am-0199

Product Description

Molded polycarbonate traction wheel

Specifications

Outside diameter: 5.86 inch (not including tread)

Inside diameter: 1.00 inch

Bearing bore: 1.124 inch x 0.25 deep (both sides)

Tread width: 0.90 inch exposed, designed to capture

1.00 inch wide tread

Width at hub: 1.54 inch

Weight: 0.66 pound

Included hardware: 6 - #10-32x1 SHCS and nylock nuts

Load capacity: 150 pounds

This wheel is designed to capture 1" wide conveyor belt tread between 2 wheel halves. The 6 perimeter screws can be loosened by 1/8 inch to install the desired tread. Treads are NOT included in the price of the wheel.

Hubs

If you wish to drive this wheel with an axle, you can pick your hub by fitting any of the AndyMark hubs (except the Small DD Globe Hub) to this wheel. Hubs are NOT included in the price of the wheel.

Bearings

If your design needs this wheel to spin on a stationary axle, you will need 2 bearings with a 1.125" od pressed into this wheel. One bearing is pressed into each side of the wheel. Bearings are NOT included in the price of this wheel.

Wider Wheels

This wheel is designed so that a 5" PVC schedule 40 pipe can be inserted between the two wheel halves, and a wider wheel can be created.

To install a sprocket or hub onto a Plaction wheel, use 10-32 x 1.75" socket head screw (qty. 3 or 6), and 10-32 nylock nuts.

To use one sprocket on each side of a Plaction wheel (2 sprockets total) use 10-32 x 2.5" screws (3 or 6) and 10-32 nylock nuts.

Downloads

3D CAD File(.stp version)
Layout print(.pdf)

Accessories

6" Performance Wheel Wedgetop Tread am-0106	6" Performance Wheel Roughtop Tread am-0107
10 ft. of Wedgetop Tread, 1" wide, natural rubber am-0522	10 ft. of Roughtop Tread, 1" wide, nitrile rubber, brown am-0523
Hubs, Spacers, Shaft Adapters	Aluminum Sprockets
1/2" id bearing, shielded (R8ZZ) am-0181	3/8" id 1.125 od ball bearing (1614ZZ) am-0209
1/2" id bearing (R8) am-0029	1/8" Dia. Alum. Rivet, 0.400 Long, Large Head, Qty. 500 am-1130